THE WORLD’S MOST POWER DENSE AND EFFICIENT HIGH SPEED ELECTRIC MOTORS

AeS801A

2.5kW eSupercharger

Aeristech 2.5kW electric supercharging solution is suitable for small displacement engines and lightweight vehicles. It is capable to run continuously at rated power reaching a maximum speed of 80,000 RPM in under 0.3 seconds. This eSupercharger is air cooled, allowing for easy integration to an engine intake system, and it is proved to improve the performance and reduce emissions of small or downsized engines needing an extra boost.
  • Rapid response to speed demand
  • High efficiency permanent magnet motor (>90%)
  • High efficiency controller (>92%)
  • High power density – low cost
  • Compact design – integration with air-box possible
General Specification
Compressor typeCentrifugal
BearingsRolling element – greased (for life)
CoolingAir (maximum 50°C)
Ambient air temperature-40°C to 100°C
Input voltage9 – 15V (12V nominal)
Mass<2.6 kg (configuration dependent)
Performance
Max compressor speed80,000 rpm
Transient response< 0.28 seconds
Max pressure ratio1.4 @ 0.022 kg/s
Max flow0.06 kg/s
Input power (IEC60034-1) @80,000 RPM)S1: 1.5 kW S6: 2.4 kW (5 min, 10% CDF)
Compressor Map
S1/S6 Map